Is there a standard maximum load that is recommended for Maple gym flooring?  

08/19/2018 Excessive loading like those resulting from the use of high point load scissor lifts can lead to surface degradation and/or weaken structural components leading to system failure. MFMA always recommends using multi-layer protection when loading a flooring system with any size lift in order to protect the integrity of the system and quality of the surface finish.

Example, MFMA recommends that when a lift (total weight, machine, operator, and load not to exceed 4,500 lbs) is used on the floor system the floor should be protected with at least two layers of ¾” thick clean protective sheathing, with overlapping seams. Protective material should include suitable clean sheathing and floor finish protections such as red rosin paper.

When operating equipment, wheels should not travel outside of the protected area, this includes while the machine is stationary or being moved. For lifts of any type where machine weight alone exceeds 3,500 lbs. consult your flooring manufacturer for further recommendations.

Note: Do not leave heavy loads on the floor overnight or for extended periods.
Disclaimer: The MFMA provides general information to architects, specifiers and consumers. The MFMA, its members, officers and agents disclaim any responsibility whatsoever for the accuracy or applicability of these guidelines under all circumstances and conditions.
Back to top
Technical Info